Reliable Leak Detection Services in New Hampshire

Unexplained bill increases typically stem from a silent running flapper valve or a cracked underground service pipe between your curb stop and the foundation. Homeowners can check this by closing every indoor fixture and inspecting the water meter's low-flow indicator triangle. Movement on that dial confirms pressurized water is escaping somewhere on your property.

Private utility responsibility begins immediately downstream of your city meter box or curb stop shut-off valve. When wet ground or pressure drops occur between that meter and your home foundation, repairs fall to the property owner. A technician verifies ownership by isolating the curb valve and testing static pressure at your exterior hose spigots.

Mention whether your water meter dial is spinning with fixtures closed, if the leak shows near electrical panels, and where damp surfaces first appeared. Sharing your foundation type—such as crawl space, basement, or concrete slab—helps dispatch route the exact acoustic or video camera equipment needed for your property in New Hampshire.

Warm floor tiles, damp baseboard edges, or the faint sound of rushing water beneath carpet indicate a hot-water domestic line rupture below your foundation. Soils beneath the slab erode as water escapes, creating foundation voids that risk structural shifting. Testing with infrared thermography pinpoints the subsurface line temperature spike without breaking concrete.

Infrared thermal imaging cameras display subtle evaporative cooling footprints on wall surfaces, highlighting damp insulation and water traveling down studs. Technicians pair thermography with non-penetrating radio-frequency moisture meters to confirm water pathways before a single drywall cut is made.